• This field is for validation purposes and should be left unchanged.

BLOG

Common Problems Related to Heating and AC in Mt Pleasant Area

Encountering problems with your heating and cooling unit? Do you want to get it repaired or do you want to get it replaced? That depends on the severity of the issue that you are facing, and only a professional company that offers heating and air conditioning repair in Mt Pleasant Area can guide you.  But nonetheless, we can still take you through the most common problems that you may face.

One point to note here: if you notice any of these issues, you should get in touch with a heating and air conditioning service in Mt Pleasant Area; not doing so, and ignoring the issues can generate huge costs later on.

Also regular maintenance is the cue to an optimal heating and cooling unit; plus, these sessions help you avoid most of the problems that we have listed. So do schedule these with a company that offers heating and air conditioning service in Mt Pleasant Area.

Onto the problems now.

Lack of Maintenance

We already mentioned this, but let’s emphasize some more. Regularly scheduled maintenance with a company that offers heating and air conditioning service in Mt Pleasant Area is absolutely vital if you want to ensure that your system remains in a topnotch condition. After all, you have put in so much money into your home’s residential system, so it only makes sense to protect it, and maintenance is the cue.

What if you don’t regularly get your unit maintained? This can lead to a number of furnace problems, costly breakdowns, suboptimal performance, greater energy bills, and let’s not forget the frustration involved when you’ll have to deal with one thing after another.

Dirty Filters

Other than maintenance, how can you improve efficiency, and extend the life of your air conditioning unit? Ask a company that offers heating and air conditioning service in Mt Pleasant Area to replace your filters; and do this on a regular basis. Dirty air filters restrict airflow, putting more strain on the furnace’s blower, and making it difficult to cool the room. The resulting temperature isn’t comfortable as well.

in some cases, a dirty filter can overheat a furnace shutting it off.

Ignition or Power Problems

These are common problems related to heating and AC in Mt Pleasant Area, often caused due to a flame sensor, dirty pilot, pilot outage, furnace lockout or short cycling.  Ignition issues can also arise due to wear and tear, gas supply problems.

How do you resolve them? You may have to ask a company that offers heating and air conditioning repair in Mt Pleasant Area to fix or repair the thermocouple or the hot surface ignitor. Reach out to them, and they will advise a feasible and affordable solution.

Thermostat Malfunctioning

Thermostats exist in a variety of types: programmable and nonprogrammable are the two broad categories. If at any instance, you think that your furnace isn’t working properly, then it is probably an issue with the thermostat or the configured settings. Many a times, this may because the batteries need a replacement, but if that doesn’t work, then check the owner’s manual and make sure you are following the guidelines. If you can’t figure out, just call  =a company that offers heating and air conditioning repair in Mt Pleasant Area, and they’ll fic it for you.

Wear and Tear

A heating system relies on several mechanical components that can get worn off with time, which may affect the performance of your unit. Belts and bearings may get damaged, which can cause poor heating, overheating and airflow blockage.

However, if you regularly get your units inspected by a heating and air conditioning service in Mt Pleasant Area, then they can keep a tab on components about to wear out, and replace them at the right time.

Furnace Noises

Does your heating and AC unit emit noises during operation? The general hum is normal, but if you hear anything unusual or awkward, then reach out to a company that offers heating and air conditioning repair in Mt Pleasant Area.  Generally, squealing and whining noises indicate that the bearings or blower motor are about to fail. And so you may have to get them repaired or replaced.

Dirty burners and problems with airflow may also cause noise, but the reason cannot be pinpointed out until you get your heating and AC unit inspected by a company that offers heating and air conditioning repair in Mt Pleasant Area.

One word of warning: don’t ignore noises because they can cause your furnace to fail or let your heating and cooling unit operate at dangerous levels.

Tripped Breakers and Blown Fuses

What is the most common reason of a tripping breaker? An over working blower, which is when the airflow is blocked, forcing the blower to work harder. Most often this is due to a dirty air filter; the blower then uses more energy, which may trip the breaker.

Get you filter checked, and see if it needs to be cleaned or replaced.  In some cases, rather than the filter, the circuit breaker might have also malfunctioned. Duct leaks, dirty coils and blocked air registers are other potential causes.

Dirty Condenser and Evaporator Coils

If debris and dirt has clogged the coils, the efficiency of the system falls, and it wears out sooner than expected.   So get them cleaned frequently.

A Continuously Running Blower

A blower continues to run if the motor is being forced to run; this is when the fan mode is enabled, often done accidentally. The furnace features a fan relay that powers the blower when heat is required. So if fan mode is enabled, the blower might not shut off. If the safety limit isn’t reset, then also the blower will continue to run.

 

So which of these problems are you facing? Call One Call Heating and Air they offer heating and air conditioning repair in Mt Pleasant Area, and they’ll get it resolved soon.